Zanotti - Split System - Freezer 2102W
Product Description
Built in two parts: the condensing unit for installation on the ceiling or floor outside the coolroom, and the evaporating unit to be installed on the ceiling inside the coolroom. To provide greater durability, the body of the condensing unit is made from epoxide powder painted steel sheet, and the evaporator is in prepainted steel sheet.
The evaporators are for ceiling installation with condensed water runoff. The unit is delivered tested and precharged with refrigerant, both the condensing part and the evaporating part, which means the unit is ready to use straight away. Supplied with connection tubing in the standard length of 2.5 metres.
The units are equipped with:
- Capillary for expansion of the refrigerant
- Fully automatic, electric type defrosting
- Electrical panel with electronic control station
- Remote control panel
Measurements of Evaporator: 215 (H) 1614(W) 410 (D) Condensing Unit: 427 (H) 860 (W) 427 (D)
Specifications
| Gross Weight (kg) | 100 |
|---|---|
| Height (mm) | 427 |
| Width (mm) | 860 |
| Depth (mm) | 427 |
| Colour | White |
| Warranty (mths) | 12 |
| Motor Type | Split System |
| Temp. Range (˚C) | -5 to -25'C |
| Max. Ambient Temp. (˚C / RH) | 45'C |
| Power (W) | 2102 |
| Current (A) | 6.3 / 12.5 |
| Temp. Display | Digital |
| Refrigerant | R404a |
| Short Description | Consists of condensing unit and evaporator for efficient freezing of smaller coolrooms. Very effective and affordable. High-quality European design. |
You have no items to compare.
